support
Maintainance and cleaning
Fill out your details below with the service that you need, date and preferred hour and we’ll get back to you to book an appointment.
How to clean porcelain stoneware
Maintaining the timeless beauty of your porcelain stoneware is easy with the right cleaning routine. Our porcelain stoneware is renowned for its durability and low-maintenance qualities, making it a preferred choice for both residential and commercial spaces. Here’s a step-by-step guide on how to keep your porcelain stoneware looking its best day after day:
Materials You’ll Need:
Soft Broom or Vacuum Cleaner: Start by removing loose dirt, dust, and debris from the surface. Using a soft broom or a vacuum cleaner with a soft brush attachment is ideal to prevent scratching.
Warm Water: Fill a bucket with warm water, as it’s gentle and effective for cleaning porcelain stoneware.
Mild pH-Neutral Detergent: Choose a mild, pH-neutral detergent. Avoid harsh chemicals or abrasive cleaners, as they can damage the surface.
Microfiber Mop or Soft Cloth: Use a microfiber mop or a soft cloth for cleaning and drying. These materials are gentle on the porcelain stoneware and help prevent streaks.
Step-by-Step Cleaning Process:
Dust and Debris Removal: Begin by sweeping or vacuuming the area to remove loose dirt, dust, and debris. This prevents these particles from scratching the surface during cleaning.
Prepare a Cleaning Solution: In a bucket, mix warm water with a mild pH-neutral detergent. Follow the manufacturer’s recommendations for the detergent-to-water ratio. Avoid using excessive detergent, as it may leave a residue.
Mop or Sponge Application: Dip your microfiber mop or a soft cloth into the soapy water and wring it out well. Mop or wipe the porcelain stoneware surface thoroughly.
Scrub Stains (If Necessary): For stubborn stains, gently scrub the affected area with a soft-bristle brush or a sponge. Avoid using abrasive pads or harsh scrubbers, as they can scratch the surface.
Rinse: Rinse the surface with clean water to remove any soapy residue. Ensure all soap is thoroughly rinsed off to prevent streaks.
Dry Thoroughly: Use a dry microfiber mop or a soft cloth to dry the porcelain stoneware. This step helps prevent water spots and streaks.
Additional Tips:
- For regular maintenance, a simple damp mop with warm water is often sufficient.
- Avoid using vinegar or acidic cleaners on porcelain stoneware, as they can damage the finish.
- If your porcelain stoneware has a textured surface, pay extra attention to grout lines and textured areas when cleaning.
- Place doormats at entryways to reduce the amount of dirt and debris that enter your space.
- Promptly clean up spills to prevent staining.
By following these cleaning tips and using the right materials, you can preserve the beauty and longevity of your porcelain stoneware for years to come. Regular, gentle cleaning is key to maintaining its original luster and elegance.
Non-slip porcelain treatment
Cleaning your outdoor tiles not only enhances the aesthetic appeal of your outdoor living area but also prolongs the life of your porcelain tiles. Outdoor tiles are exposed to various elements, so a regular cleaning routine is essential to maintain their pristine appearance. Here’s a step-by-step guide on how to clean your outdoor tiles, ensuring they remain in top-notch condition for years to come:
Materials You’ll Need:
Soft Broom or Stiff Brush: Start by removing loose dirt, leaves, and debris from the tile surface. A soft broom or stiff brush is excellent for this purpose.
Hose or Pressure Washer (Optional): A hose or pressure washer can be useful for rinsing tiles, especially if there’s a heavy accumulation of dirt or grime.
Warm Water: Fill a bucket with warm water, as it’s gentle yet effective for cleaning outdoor tiles.
Mild pH-Neutral Detergent: Choose a mild, pH-neutral detergent specially formulated for outdoor surfaces. Avoid harsh chemicals or abrasive cleaners to prevent damage to the tiles.
Soft Bristle Brush or Deck Brush: Use a soft bristle brush or a deck brush to scrub the tiles. These brushes are effective without scratching the surface.
Microfiber Mop or Soft Cloth: A microfiber mop or soft cloth is ideal for drying the tiles, preventing water spots and streaks.
Step-by-Step Cleaning Process:
Pre-Clean Debris Removal: Begin by sweeping away loose dirt, leaves, and debris from the tile surface using a soft broom or stiff brush. This prevents scratching during the cleaning process.
Hose Down the Area (Optional): If the tiles are particularly dirty, you can use a hose or pressure washer to rinse off the initial layer of grime. Ensure the water pressure is not too high to avoid damaging the tiles.
Prepare a Cleaning Solution: In a bucket, mix warm water with a mild pH-neutral detergent designed for outdoor use. Follow the manufacturer’s guidelines for the detergent-to-water ratio.
Scrub the Tiles: Dip a soft bristle brush or a deck brush into the soapy water and gently scrub the outdoor tiles. Pay special attention to any stained or heavily soiled areas.
Rinse Thoroughly: Use a hose or bucket of clean water to rinse the tiles. Ensure all soapy residue is completely removed.
Dry the Tiles: Use a microfiber mop or a soft cloth to dry the outdoor tiles. This helps prevent water spots and streaks, leaving your tiles looking clean and shiny.
Additional Tips:
- For regular maintenance, a simple sweeping or rinsing with a hose may be sufficient.
- Do not use acidic cleaners or harsh chemicals on outdoor tiles, as they can damage the finish and grout.
- In areas with heavy foliage, consider placing leaf and debris catchers or regular cleaning to prevent staining.
By incorporating these cleaning steps into your outdoor tile maintenance routine, you can enjoy a beautiful and inviting outdoor space throughout the year. Regular cleaning not only enhances the appearance of your outdoor tiles but also contributes to their long-lasting durability.
After Installation Tile Cleaning: Ensuring a Flawless Finish
Prepare the Cleaning Solution: In a bucket, mix warm water with a mild pH-neutral detergent. Ensure that the detergent-to-water ratio adheres to the manufacturer’s guidelines.
Gently Scrub the Surface: Dip a soft bristle brush or grout brush into the soapy water and gently scrub the porcelain tiles. Pay close attention to the grout lines and any visible residue from the installation process.
Rinse Thoroughly: Once you’ve cleaned the tiles and grout, rinse the surface with clean water to remove any soap or cleaning solution residue. It’s important to eliminate any soapy film, as it can cause streaks.
Dry the Tiles: Use microfiber cloths or soft towels to dry the tiles. Drying ensures that no water spots are left behind, leaving your porcelain tiles with a flawless finish.
The Art of Grouting: Enhancing the Beauty and Durability of Tiles
Grouting is a crucial step in the tile installation process that plays a significant role in both the aesthetics and longevity of your tiled surface. This material, often made of cement, epoxy, or polymer-based compounds, fills the gaps between tiles, adding both structural integrity and a finished look to your tiling project. Here’s a closer look at the art of grouting and its importance:
Key Functions of Grout:
Stability and Support: Grout serves as a structural element that helps to stabilize and support the tiles. It prevents them from shifting or cracking over time, particularly in high-traffic areas.
Sealing the Gaps: Grout effectively seals the gaps between tiles, preventing moisture, dirt, and debris from penetrating beneath the surface. This not only maintains the cleanliness of the tiled area but also protects the substrate beneath the tiles.
Aesthetic Enhancement: Grout lines can significantly impact the overall appearance of the tiled surface. They can be used to create visual contrast or harmony, depending on the design goals. The color of the grout can also influence the final look of the tiles, making it an essential element in the design process.
Flexible or Resilient Joints: Depending on the type of grout used, it can offer flexibility or resilience to accommodate the natural expansion and contraction of materials due to temperature changes. This flexibility is particularly crucial for outdoor tiles subject to weather conditions.
Types of Grout:
There are various types of grout, each tailored to specific project requirements:
Cement-Based Grout: The most common type, it’s suitable for most indoor applications and is available in sanded and unsanded varieties. Sanded grout is used for wider grout lines, while unsanded grout is for narrower lines.
Epoxy Grout: Known for its exceptional durability and resistance to stains and water, epoxy grout is often used in kitchens, bathrooms, and high-traffic areas.
Polymer-Modified Grout: Combining cement with polymers, this grout offers enhanced flexibility and resistance to cracking. It’s a good choice for both indoor and outdoor use.
Urethane Grout: Urethane grout is durable, stain-resistant, and ideal for high-moisture areas like showers and swimming pools.
Grouting Process:
Mixing: Grout is mixed to the proper consistency, following the manufacturer’s instructions.
Application: Grout is applied with a rubber float, ensuring that it fills the spaces between tiles.
Cleaning: After allowing the grout to set for a specific time (usually 15-30 minutes), excess grout is wiped away using a damp sponge or cloth.
Curing: The grout is allowed to cure, typically for a minimum of 72 hours, before the tiled area can be used.
Maintenance:
Proper grout maintenance is essential to ensure its longevity and appearance. Periodic sealing, cleaning, and regrouting, if necessary, will help preserve the integrity and aesthetics of the tiled surface.
In essence, grouting is not just a practical necessity but also a creative element in tile design. The right choice of grout can enhance the beauty and durability of your tiled spaces, making it a vital component of any tiling project.
After Installation Tile Cleaning: Ensuring a Flawless Finish
The Art of Grouting: Enhancing the Beauty and Durability of Tiles
Grouting is a crucial step in the tile installation process that plays a significant role in both the aesthetics and longevity of your tiled surface. This material, often made of cement, epoxy, or polymer-based compounds, fills the gaps between tiles, adding both structural integrity and a finished look to your tiling project. Here’s a closer look at the art of grouting and its importance:
Key Functions of Grout:
Stability and Support: Grout serves as a structural element that helps to stabilize and support the tiles. It prevents them from shifting or cracking over time, particularly in high-traffic areas.
Sealing the Gaps: Grout effectively seals the gaps between tiles, preventing moisture, dirt, and debris from penetrating beneath the surface. This not only maintains the cleanliness of the tiled area but also protects the substrate beneath the tiles.
Aesthetic Enhancement: Grout lines can significantly impact the overall appearance of the tiled surface. They can be used to create visual contrast or harmony, depending on the design goals. The color of the grout can also influence the final look of the tiles, making it an essential element in the design process.
Flexible or Resilient Joints: Depending on the type of grout used, it can offer flexibility or resilience to accommodate the natural expansion and contraction of materials due to temperature changes. This flexibility is particularly crucial for outdoor tiles subject to weather conditions.
Types of Grout:
There are various types of grout, each tailored to specific project requirements:
Cement-Based Grout: The most common type, it’s suitable for most indoor applications and is available in sanded and unsanded varieties. Sanded grout is used for wider grout lines, while unsanded grout is for narrower lines.
Epoxy Grout: Known for its exceptional durability and resistance to stains and water, epoxy grout is often used in kitchens, bathrooms, and high-traffic areas.
Polymer-Modified Grout: Combining cement with polymers, this grout offers enhanced flexibility and resistance to cracking. It’s a good choice for both indoor and outdoor use.
Urethane Grout: Urethane grout is durable, stain-resistant, and ideal for high-moisture areas like showers and swimming pools.
Grouting Process:
Mixing: Grout is mixed to the proper consistency, following the manufacturer’s instructions.
Application: Grout is applied with a rubber float, ensuring that it fills the spaces between tiles.
Cleaning: After allowing the grout to set for a specific time (usually 15-30 minutes), excess grout is wiped away using a damp sponge or cloth.
Curing: The grout is allowed to cure, typically for a minimum of 72 hours, before the tiled area can be used.
Maintenance:
Proper grout maintenance is essential to ensure its longevity and appearance. Periodic sealing, cleaning, and regrouting, if necessary, will help preserve the integrity and aesthetics of the tiled surface.
In essence, grouting is not just a practical necessity but also a creative element in tile design. The right choice of grout can enhance the beauty and durability of your tiled spaces, making it a vital component of any tiling project.
What is porcelain tile, and how is it different from ceramic tile?
Porcelain tile is a type of ceramic tile that is denser, more durable, and less porous than standard ceramic tiles. Porcelain is fired at a higher temperature, making it exceptionally resistant to water, stains, and wear.
What are the advantages of using porcelain tile in my home?
Porcelain tile is known for its durability, water resistance, and low maintenance. It’s an excellent choice for high-traffic areas, including kitchens and bathrooms, and it comes in a wide range of styles, colors, and sizes to suit various design preferences.
How do I clean and maintain porcelain tile?
Regularly sweeping or vacuuming to remove debris and damp mopping with a pH-neutral, non-abrasive cleaner is usually sufficient. Be sure to clean up spills promptly to prevent staining.
Can porcelain tiles be used outdoors?
Yes, porcelain tiles are suitable for outdoor use. They are highly resistant to moisture, making them a great choice for patios, walkways, and other outdoor applications.
What is grout, and why is it necessary?
Grout is a cementitious or resin-based material used to fill the gaps between tiles. It provides stability, seals the gaps, and enhances the aesthetics of the tiled surface. Grout helps prevent moisture, dirt, and debris from infiltrating beneath the tiles.
How do I clean and maintain porcelain tile?
Grout is a cementitious or resin-based material used to fill the gaps between tiles. It provides stability, seals the gaps, and enhances the aesthetics of the tiled surface. Grout helps prevent moisture, dirt, and debris from infiltrating beneath the tiles.
What are the different types of grout, and how do I choose the right one for my project?
Common types of grout include cement-based, epoxy, polymer-modified, and urethane grout. The choice depends on factors such as location, tile type, and desired characteristics like durability and stain resistance.
Can I change the color of my grout after installation?Can I change the color of my grout after installation?
Yes, you can change the color of your grout by using grout colorants or sealers. This allows you to update the look of your tiled space without regrouting.
How often should I reseal my grout?
Grout should be resealed every one to two years, depending on usage and the type of sealer used. Resealing helps maintain its water resistance and appearance.
What's the difference between sanded and unsanded grout?
Sanded grout is used for wider grout lines, typically over 1/8 inch, and contains fine sand for added strength. Unsanded grout is for narrower lines, generally under 1/8 inch, and is sand-free.